Implemented an arpeggiator and then broke it (should wait for MIDI clock). Added a basic implementation of 3 capacitive buttons (for drum pads)

cvkeyboard.ino

@@ -18,10 +18,13 @@
 #define Oct4 10
 
 #define noteOffset 36
+#define MINUTE 60000
 
-//#include <MIDI.h>
-//#include <HID.h>
-//MIDI_CREATE_DEFAULT_INSTANCE();
+#include <CapacitiveSensor.h>
+#include <MIDI.h>
+#include <HID.h>
+
+MIDI_CREATE_DEFAULT_INSTANCE();
 
 typedef struct OctaveStatus {
 	bool stat[12];
@@ -32,11 +35,24 @@ int note[12] = {
   C, Db, D, Eb, E, F, Gb, G, Ab, A, Bb, B };  // Note Pins above
 int octave[4] = {
   Oct1, Oct2, Oct3, Oct4 };           // Octave Pins above
-int ledPins[12]{
-  19, 18, 17, 16, 15, 14, 2, 3, 4, 5, 6, 0 };
 
-int clock = 0;									// Keeps track of current octave
+int clock = 0;                  // Used if arp to cycle through notes
 octst buff;
+bool kboard[49];
+bool raw;                   // Global Settings. RAW = signal is sent when key is detected
+byte velocity = 100;
+byte channel = 1;
+byte midi_clock = 0xf8;
+byte dataIn;
+int bpm = 360;
+unsigned long nextBeat = 0;
+unsigned long gate = 50;                  //ms of keypress if arpeggiator
+int npressed;
+bool bu1, bu2, bu3;
+
+CapacitiveSensor b1 = CapacitiveSensor(5, 6);
+CapacitiveSensor b2 = CapacitiveSensor(4, 3);
+CapacitiveSensor b3 = CapacitiveSensor(16, 17);
 
 void setup() {
 	for (int cOctave = 0; cOctave < 4; cOctave++) {
@@ -45,30 +61,43 @@ void setup() {
 	for (int cNote = 0; cNote < 12; cNote++) {
 		pinMode(note[cNote], INPUT);
 	}
-	for (int cLed = 0; cLed < 12; cLed++) {
-		pinMode(ledPins[cLed], OUTPUT);
-	}
-	//  MIDI.begin(MIDI_CHANNEL_OFF);
+	MIDI.begin(MIDI_CHANNEL_OFF);
 	Serial.begin(115200);
-	//  nextBeat = millis() + (MINUTE / bpm);
-	for (int cLed = 0; cLed < 12; cLed++) {
-		digitalWrite(ledPins[cLed], HIGH);
-		delay(100);
-	}
-	for (int cLed = 0; cLed < 12; cLed++) {
-		digitalWrite(ledPins[cLed], LOW);
-		delay(100);
-	}
-	pinMode(50, OUTPUT);
+	nextBeat = millis() + (MINUTE / bpm);
+	pinMode(2, INPUT_PULLUP);
+	for (int cStat = 0; cStat < 49; cStat++) kboard[cStat] = LOW;
+	nextBeat = 0;
+
+	b1.set_CS_AutocaL_Millis(0xFFFFFFFF);
+	b2.set_CS_AutocaL_Millis(0xFFFFFFFF);
+	b3.set_CS_AutocaL_Millis(0xFFFFFFFF);
+	bu1 = LOW;
+	bu2 = LOW;
+	bu3 = LOW;
 }
 
 void loop() {
-	for (clock = 0; clock < 4; clock++) {
-		digitalWrite(octave[clock], HIGH);
-		buff = scan(clock);
-		digitalWrite(octave[clock], LOW);
-		debug(buff);
-		serialDebug(buff);
+	scanButtons();
+
+	npressed = 0;
+	raw = digitalRead(2);
+	for (int cOctave = 0; cOctave < 4; cOctave++) {
+		digitalWrite(octave[cOctave], HIGH);
+		npressed += eval(scan(cOctave));
+		digitalWrite(octave[cOctave], LOW);
+	}
+	if (raw) return;
+	if (npressed < 1) return;
+	dataIn = Serial.read();
+	if (dataIn == midi_clock) {
+		clock++;
+		while (kboard[clock] == LOW) {
+			clock++;
+			if (clock == 49) clock = 0;
+		}
+		playNote(clock, HIGH);
+		delay(gate);
+		playNote(clock, LOW);
 	}
 }
 
@@ -85,15 +114,18 @@ octst scan(int nOct) {					// This function reads the 12 note pins and returns a
 	return output;
 }
 
-void debug(octst input) {				// Lights up 12 LEDs used to control the readings
-	int c;
-	for (c = 0; c < 12; c++) {
-		digitalWrite(ledPins[c], input.stat[c]);
+int eval(octst input) {
+	int pressed = 0;
+	int snote = input.nOct * 12;
+
+	for (int c = 0; c < 12; c++) {
+		if (input.stat[c] ^ kboard[c + snote]) {
+			if (raw) playNote(c + snote, input.stat[c]);
+			kboard[c + snote] = input.stat[c];
 		}
-	delay(5);
-	for (c = 0; c < 12; c++) {
-		digitalWrite(ledPins[c], LOW);
+		if (kboard[c + snote] == HIGH) pressed++;
 	}
+	return pressed;
 }
 
 void serialDebug(octst input) {     // Prints on the Serial Monitor the 12 bits just read
@@ -103,28 +135,81 @@ void serialDebug(octst input) {			// Prints on the Serial Monitor the 12 bits ju
 	Serial.println("");
 }
 
-bool debouncedRead(int pin) {			// Should clear readings from false positives but doesn't work
-	if (digitalRead(pin) == HIGH) {
-		if (digitalRead(pin) == HIGH) {
-			if (digitalRead(pin) == HIGH) {
-				if (digitalRead(pin) == HIGH) {
-					if (digitalRead(pin) == HIGH) {
+void playNote(int c, bool status) {
+	byte n = c + noteOffset;
+	if (status == HIGH) {
+		MIDI.sendNoteOn(n, velocity, channel);
+	}
+	else if (status == LOW) {
+		MIDI.sendNoteOff(n, velocity, channel);
+	}
+}
+
+void scanButtons() {
+	long sensor1 = b1.capacitiveSensor(1);
+	long sensor2 = b2.capacitiveSensor(1);
+	long sensor3 = b3.capacitiveSensor(1);
+
+	if (sensor1 > 10) {
+		if (!bu1) {
+			MIDI.sendNoteOn(95, velocity, 7);
+			bu1 = HIGH;
+		}
+	}
+	else {
+		if (bu1) {
+			MIDI.sendNoteOff(95, velocity, 7);
+			bu1 = LOW;
+		}
+	}
+
+
+	if (sensor2 > 10) {
+		if (!bu2) {
+			MIDI.sendNoteOn(97, velocity, 7);
+			bu2 = HIGH;
+		}
+	}
+	else {
+		if (bu2) {
+			MIDI.sendNoteOff(97, velocity, 7);
+			bu2 = LOW;
+		}
+	}
+
+
+	if (sensor3 > 10) {
+		if (!bu3) {
+			MIDI.sendNoteOn(99, velocity, 7);
+			bu3 = HIGH;
+		}
+	}
+	else {
+		if (bu3) {
+			MIDI.sendNoteOff(99, velocity, 7);
+			bu3 = LOW;
+		}
+	}
+	/*bu1 = evalButton(b1, bu1, 95);
+	bu2 = evalButton(b2, bu2, 97);
+	bu3 = evalButton(b3, bu3, 99);*/
+}
+
+bool evalButton(CapacitiveSensor b, bool value, int note) {
+	long sensor = b.capacitiveSensor(1);
+
+	if (sensor > 15) {
+		if (value) return HIGH;
+		else {
+			MIDI.sendNoteOn(note, velocity, 7);
 			return HIGH;
 		}
 	}
-			}
-		}
-	}
+	else {
+		if (!value) return LOW;
+		else {
+			MIDI.sendNoteOff(note, velocity, 7);
 			return LOW;
-}
-
-/*octst clearOct(octst o1, octst o2, octst o3, octst o4, octst o5) {
-  octst output;
-
-  output.nOct = o1.nOct;
-  for (int c = 0; c < 12; +c++) {
-	if (o1.stat[c] && o2.stat[c] && o3.stat[c] && o4.stat[c] && o5.stat[c]) output.stat[c] = HIGH;
-	else output.stat[c] = LOW;
 		}
-  return output;
-}*/
+	}
+}